Description:
Our control chokes are available with a plug and cage or an external sleeve trim. These chokes are designed to provide accurate flow control throughout its operating range. The internal internally guided plug controls the opening and rate of flow. It is a robust design with its maximum flow capacity, making it ideal for oil production water injection and chemical injection services. A major consideration when sizing the choke is the ability to closely manage well startup while optimizing capacity toward the end of well life to maximize production.
The plug and cage design is highly optimized and incorporates the largest-possible flow area, making it ideal for high-capacity applications. Plug and cage chokes also are constructed with a solid tungsten carbide plug tip and inner cage for extended resistance to erosion. These valves may further be configured with a solid tungsten carbide wear sleeve in the outlet of the body to provide enhanced protection in sandy service.
Description:
| item |
Component |
| 1 |
Body |
| 2 |
Grease Fitting |
| 3 |
Gasket Ring |
| 4 |
O-Ring |
| 5 |
O-Ring |
| 6 |
Barrel I |
| 7 |
Barrel ll |
| 8 |
Seat |
| 9 |
Basket |
| 10 |
Bolt |
| 11 |
Nut |
| 12 |
Bonnet Nut |
| 13 |
O-Ring |
| 14 |
Bonnet Gasket |
| 15 |
O-Ring |
| 16 |
Bearing |
| 17 |
Stem Nut |
| 18 |
Bearing cover |
| 19 |
Screw |
| 20 |
Locking Screw |
| 21 |
O-Ring |
| 22 |
Packing |
| 23 |
Key |
| 24 |
Stem |
| 25 |
Grease Cup |
| 26 |
Bonnet Cap |
| 27 |
Casing |
| 28 |
Screw |
| 29 |
Indicator |
| 30 |
Handwheel |